home *** CD-ROM | disk | FTP | other *** search
/ Tech Arsenal 1 / Tech Arsenal (Arsenal Computer).ISO / tek-04 / goinstal.zip / GO.INF < prev    next >
Text File  |  1992-10-17  |  43KB  |  1,739 lines

  1.  
  2.  
  3.  
  4.  
  5.  
  6.  
  7.  
  8.  
  9.  
  10.  
  11.                                      GO!
  12.  
  13.  
  14.                       The Install-From-Diskette Program
  15.  
  16.  
  17.  
  18.                                 User's Manual
  19.  
  20.  
  21.  
  22.  
  23.  
  24.  
  25.  
  26.  
  27.  
  28.  
  29.                            Copyright (C) 1991, 1992
  30.  
  31.                                      and
  32.  
  33.                              All Rights Reserved
  34.  
  35.                                       by
  36.  
  37.                            -- PINNACLE SOFTWARE --
  38.                            CP 386 Ville Mont Royal
  39.                            Quebec, Canada, H3P 3C6
  40.  
  41.  
  42.  
  43.  
  44.  
  45.  
  46.  
  47.  
  48.  
  49.  ----------------------------------------------------------------------------
  50.  
  51.                      FROM THE OXFORD ENGLISH DICTIONARY:
  52.  
  53.    GO, v.i. Start, depart ... with self-originated or imparted motion, from
  54.     some place, position, time etc. ... always specified if it matters ...
  55.  
  56.  ----------------------------------------------------------------------------
  57.  
  58.                                 -------------
  59.                                 Legal Notices
  60.                                 -------------
  61.  
  62.  
  63. The  GO program and  related files  are distributed  using freeware/shareware
  64. concepts.   You  are entitled  to use  these programs  for free,  but certain
  65. restrictions apply.  Refer to  the section of this manual  entitled "Versions
  66. and Registration" for details.
  67.  
  68.  
  69. The following products  are mentioned in  this manual and are  trademarked or
  70. otherwise protected:
  71.  
  72.  
  73.    PRODUCT  For Information Contact
  74.    -------  -----------------------
  75.    ARC      System Enhancement Associates (SEA)
  76.    ARCE     Vernon Buerg, or System Enhancement Associates
  77.    COPYQM   Sydex
  78.    DIET     Teddy Matsumoto
  79.    FORMATQM Sydex
  80.    LHARC    Haruyasu Yoshizaki
  81.    LIST     Vernon Buerg
  82.    PKLITE   PKWare
  83.    PKUNZIP  PKWare
  84.  
  85.  
  86. Several  text  editor  programs are  mentioned  in this  manual.    These are
  87. trademarked or otherwise protected by their respective companies or authors.
  88.  
  89.  
  90.  
  91.  
  92.  
  93.  
  94.  
  95.  
  96.  
  97.  
  98.  
  99.  
  100.  
  101.  
  102.  
  103.  
  104.  
  105.  
  106.  
  107.  
  108.  
  109.  
  110.  
  111.  
  112.  
  113.  
  114.                                       ii
  115.  
  116.                               -----------------
  117.                               Table of Contents
  118.                               -----------------
  119.  
  120.  
  121.  
  122. Legal Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    ii
  123.  
  124. Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .   iii
  125.  
  126. A Quick Overview of the GO Package  . . . . . . . . . . . . . . . . . . .   1
  127.  
  128. Basic Concepts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   2
  129.    What is GO?
  130.    How GO Works
  131.    Using GO
  132.    Optional Menu Lines
  133.    The "Information" Selection
  134.       Colorization Rules
  135.    The "Install" Selection
  136.  
  137. Changing the Dearchiving Method . . . . . . . . . . . . . . . . . . . . .   6
  138.    Doing it the Easy Way
  139.    Doing It the Hard Way
  140.  
  141. Intermediate Techniques . . . . . . . . . . . . . . . . . . . . . . . . .   7
  142.    Start-Up Parameters
  143.    Generating an Introductory Screen
  144.    Letting the User Choose His Viewing Method
  145.    Information and Install Menus
  146.       Menu Order
  147.  
  148. Advanced Techniques . . . . . . . . . . . . . . . . . . . . . . . . . . .   9
  149.    Using the .GO Extension of Text Files
  150.    The ;INST Command
  151.  
  152. Multi-Disk Installation . . . . . . . . . . . . . . . . . . . . . . . .    10
  153.    Installation Example
  154.    NAMe 
  155.    SENDto 
  156.    STARt 
  157.    THISdisk 
  158.    NEWDisk 
  159.    NEWFile 
  160.  
  161. The GO-COPY Program . . . . . . . . . . . . . . . . . . . . . . . . . .    14
  162.    What is GO-COPY?
  163.    The GO-COPY.COP File
  164.  
  165. The GO-DISKS Program  . . . . . . . . . . . . . . . . . . . . . . . . .    15
  166.    What is GO-DISKS?
  167.    GO-COPY and GO-DISKS Samples
  168.  
  169.  
  170.  
  171.  
  172.                                      iii
  173.  
  174. Using GO in Batch Files . . . . . . . . . . . . . . . . . . . . . . . .    16
  175.    What is GO-MENU?
  176.    Using GO -D With GO-Menu
  177.    The GO.HDG File
  178.  
  179. Hints and Tips  . . . . . . . . . . . . . . . . . . . . . . . . . . . .    18
  180.    Specifying GO-COPY File Names
  181.    Renaming Copy Files
  182.  
  183. Other Programs Included with GO . . . . . . . . . . . . . . . . . . . .    19
  184.    SEE
  185.    GO_SMALL
  186.    READING
  187.    SETERR
  188.    WAITBLK
  189.  
  190. Versions and Registration . . . . . . . . . . . . . . . . . . . . . . .    21
  191.    Changes Between Versions
  192.    Free Usage of GO Programs
  193.    Ordering Upgrades to GO
  194.       Standard Discount
  195.    Thank-You
  196.  
  197. Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    23
  198.  
  199.  
  200.  
  201.  
  202.  
  203.  
  204.  
  205.  
  206.  
  207.  
  208.  
  209.  
  210.  
  211.  
  212.  
  213.  
  214.  
  215.  
  216.  
  217.  
  218.  
  219.  
  220.  
  221.  
  222.  
  223.  
  224.  
  225.  
  226.  
  227.  
  228.  
  229.  
  230.                                       iv
  231.  
  232.                       ----------------------------------
  233.                       A Quick Overview of the GO Package
  234.                       ----------------------------------
  235.  
  236.  
  237. The GO package includes the following programs:
  238.  
  239.  
  240. GO
  241.  
  242.    Place this program on any diskette you send  out which contains compressed
  243.    archive files  (e.g. .ZIP or .LZH).  The GO program will make installation
  244.    easy.  This is especially important if you send disks to computer novices.
  245.    GO can also display information, or print out a reply form.
  246.  
  247.  
  248. GO-COPY
  249.  
  250.    This program makes it possible for computer novices to copy selected files
  251.    from  your disk  onto  another  diskette.   This  is handy  if  you are  a
  252.    shareware  author, since  you  want to  make your  software  easy to  pass
  253.    around.
  254.  
  255.  
  256. GO-DISKS
  257.  
  258.    This program reads in a  list of file names,  then copies those files to  
  259.    diskettes.  Since the files are kept in RAM during the copy, you can mass-
  260.    produce disks much more quickly than if you were using the COPY command.
  261.  
  262.  
  263. GO-MENU
  264.  
  265.    This program is used in a batch file  to present a menu of up to 10 items.
  266.    This  is ideal  for  organizing a  diskette  containing several  unrelated
  267.    programs.  A much simpler "pick an option" program is also included in the
  268.    GO package -- see the GETKEY program mentioned below.
  269.  
  270.  
  271. The  package also  includes these  small utility  programs which  have proved
  272. themselves useful in packaging software:
  273.  
  274.    SEE         File viewer/printer
  275.    GO_SMALL    A compressed but fully functional version of GO.EXE
  276.    READING     Places the message "Reading disk..." on the screen
  277.    SETERR      Sets the DOS Errorlevel
  278.    GETKEY      Waits for user to hit a key and reports result as ERRORLEVEL
  279.    WAIT        Waits for time-out or for a key-press
  280.    WAITBLK     Waits for a blank diskette in the indicated drive
  281.  
  282.  
  283. Each of these programs are described in more detail later.
  284.  
  285.  
  286.  
  287.  
  288.                                       1
  289.  
  290.                                 --------------
  291.                                 Basic Concepts
  292.                                 --------------
  293.  
  294.  
  295.  
  296. What is GO?
  297. -----------
  298.  
  299.  
  300. "GO" is  an installation program.   It is  a simple "shell"  for "dearchiving
  301. programs" such  as PKUNZIP, ARCE, LHARC and so on.   GO is a very specialized
  302. shell.    You use  it for  ONE purpose  only:   distribution of  software via
  303. diskette.
  304.  
  305. If you've ever given a computer novice a diskette with  an archived file, you
  306. know the routine:
  307.  
  308.    "Okay, you put the diskette in the drive, then type PKUNZIP followed by
  309.    the root name of the zip and then the  name of the directory it's going
  310.    to, unless  you're there already ...  and don't forget to  separate the
  311.    parameters with spaces!"
  312.  
  313. The usual comment after such an explanation is:
  314.  
  315.                   "Can't you make it any easier that that?"
  316.  
  317. Thanks to GO ... you can!
  318.  
  319.  
  320.  
  321. How GO Works
  322. ------------
  323.  
  324.  
  325. NOTE: In this manual, we refer to archive  files as ZIP files.  The shareware
  326.       version  of GO is initially  configured to dearchive  files produced by
  327.       PKWare's PKZIP  program, but  it can  also work with  ARC, PAK,  ZOO or
  328.       other archive formats.  We ourselves like to use the LZH format on some
  329.       of our distribution diskettes.
  330.  
  331. When you're preparing a diskette for somebody, copy one or more ZIP files (up
  332. to a  maximum of 9) onto the diskette, plus the dearchiving program, plus the
  333. file GO.EXE.  Then write a short explanation on the diskette label:
  334.  
  335.                   Put this diskette in the A: drive
  336.                   At the DOS prompt enter the command A:GO
  337.  
  338. If you know that  the user uses a DOS shell menu, you  may have to alter your
  339. explanation slightly.
  340.  
  341. If the user follows those simple instructions, he will be able to install the
  342. ZIP files that are located on the diskette.
  343.  
  344.  
  345.  
  346.                                       2
  347.  
  348. The user does require a certain bare minimum level of knowledge, though.   He
  349. must be familiar with terms like Drive A:, File, and Directory.
  350.  
  351.  
  352.  
  353. Using GO
  354. --------
  355.  
  356.  
  357. When the user types A:GO (or B:GO if appropriate) he is presented with a very
  358. simple menu that offers him the following three choices:
  359.  
  360.                                Information
  361.                                Install
  362.                                Quit
  363.  
  364. He can select an option either with function keys or by  using the arrow keys
  365. and Enter.
  366.  
  367. <Information>  displays a text file on the  diskette.  If there are more than
  368. one text file, he is presented with a menu.
  369.  
  370. <Install>  suggests  a  directory name  (which  the  user  can change),  then
  371. dearchives  the program  into that  directory.   If there  are more  than one
  372. archive file, he is first presented with a menu.
  373.  
  374.  
  375.  
  376. Optional Menu Lines
  377. -------------------
  378.  
  379.  
  380. The GO  menu  sometimes shows  more  than  the three  items  mentioned  (i.e.
  381. Information, Install and Quit).  The following two items may also appear:
  382.  
  383.                              About "GO"
  384.                              Print reply form
  385.  
  386. <About  "GO">  appears on  all unregistered  copies of  GO.   If you  order a
  387. personalized copy of GO  ($16 + $3  S&H), this advertisement will  disappear.
  388. (Personalized copies  also replace our copyright notice on the main menu with
  389. the text of your choice.)
  390.  
  391. <Print reply  form>  appears only  if  the file  GO-FORM.DAT appears  on  the
  392. diskette.  GO-FORM.DAT  is a text file that  can be prepared on  any standard
  393. DOS text editor.
  394.  
  395.  
  396.  
  397.  
  398.  
  399.  
  400.  
  401.  
  402.  
  403.  
  404.                                       3
  405.  
  406. The "Information" Selection
  407. ---------------------------
  408.  
  409.  
  410. GO's Information section  is designed exclusively for  small text files.   If
  411. you   want  to  provide  the  user  with  extensive  documentation  prior  to
  412. installation,  we  recommend that  you  purchase  Pinnacle Software's  HELPME
  413. program ($15) or  (as a quick alternative) use the  SEE program provided with
  414. GO.
  415.  
  416. A "text file" is any file with an extension of TXT, LST, or S-D.
  417.  
  418. The  Information section  is appropriate  for displaying  one or  two screens
  419. containing important information such as:
  420.  
  421.               A brief description of what's on the disk
  422.               How the user can obtain help if he gets stuck
  423.  
  424. If  the  user is  viewing  the text  on a  color  monitor, the  text  will be
  425. displayed in various colors, according to some simple rules.
  426.  
  427.  
  428.  
  429. Colorization Rules
  430.  
  431.  
  432. If the viewer is using monochrome or MODE BW80, all text is the same color.
  433. Otherwise...
  434.  
  435.  
  436.        IF THE LINE CONTAINS         THE COLOR IS
  437.        --------------------         ------------
  438.        Regular text                 LightGreen       unless...
  439.        Four spaces in a row         Yellow           unless...
  440.        All uppercase                LightMagenta     unless...
  441.        Characters over ASCII 128    LightCyan        unless...
  442.        ;NEW or ASCII 12 in col. 1   White on Blue
  443.  
  444.  
  445. NOTE:  ASCII 12 (CTRL-L i.e. Form Feed) causes a new screen to be displayed. 
  446. All  text   editors  have   a  method   for  inserting   control  characters.
  447. WordStar-style editors (QEdit, Turbo Pascal  Editor, etc.) can insert  Ctrl-L
  448. with the keystroke sequence Ctrl-P Ctrl-L.  If you can not type a CTRL-L, you
  449. can type ;NEW instead.  The advantage of using CTRL-L is that it will cause a
  450. page-eject if the document is printed out.
  451.  
  452. Of course,  this colorization  technique is  not as  powerful  as using  ANSI
  453. displays, but it  allows the more  advanced user to  view or print  the files
  454. using whatever method he prefers.  Also, these colorization rules let you use
  455. a regular  text file, are  easily memorized,  and generally  create a  fairly
  456. attractive display.
  457.  
  458.  
  459.  
  460.  
  461.  
  462.                                       4
  463.  
  464. The "Install" Selection
  465. -----------------------
  466.  
  467.  
  468. NOTE: The "Install" selection appears on the main  GO menu only if GO sees an
  469.       archive file that uses the format it is configured for (e.g. a ZIP file
  470.       if GO is configured to use PKUNZIP, ARC for ARCE, etc.)
  471.  
  472. When  the user selects "Install"  from the main GO menu,  the archive file on
  473. the diskette is installed in a directory with the same name.  (The user has a
  474. chance to change the name of the directory, however.)
  475.  
  476. If there is morethan one archive file, theuser is first presented witha menu.
  477.  
  478. Remember to put  a copy of the  dearchiving program on  the diskette, or  the
  479. installation step will display an error message.  (In such case, GO will scan
  480. the  user's  PATH  for  a  copy  of the  dearchiving  program,  but  it  will
  481. nevertheless caution him that  it expected to  find a dearchiving program  on
  482. the  diskette.   This  forewarns  the user  that  problems may  occur  if his
  483. dearchiver is obsolete.)
  484.  
  485. After  the installation  is complete, GO  looks in  the directory  for a file
  486. named READ.ME.  If  it finds it, it displays it.  If  it can't find a READ.ME
  487. file,  it displays the first DOC file in  the directory.  GO then returns the
  488. user to DOS (or the DOS shell).
  489.  
  490. Thus,  your READ.ME should  tell the user what  to do next  (how to start the
  491. program, usually).
  492.  
  493. If your installation  is fancy  (i.e. requires dearchiving  the archive  file
  494. into  several  different directories),  you  could place  the  directories in
  495. separate archive files.   A better solution is to  order a customized version
  496. of GO, or to modify the dearchiving parameters.  The method for doing this is
  497. explained in the next section.
  498.  
  499. See also "The ;INST Command" in "Advanced Techniques".
  500.  
  501.  
  502.  
  503.  
  504.  
  505.  
  506.  
  507.  
  508.  
  509.  
  510.  
  511.  
  512.  
  513.  
  514.  
  515.  
  516.  
  517.  
  518.  
  519.  
  520.                                       5
  521.  
  522.                        -------------------------------
  523.                        Changing the Dearchiving Method
  524.                        -------------------------------
  525.  
  526.  
  527.  
  528. Doing it the Easy Way
  529. ---------------------
  530.  
  531.  
  532. When you order a registered copy of GO from Pinnacle Software, you may ask us
  533. to change the dearchiving method.   Please remember to cite the  precise name
  534. of the program that does the dearchiving, the extension of  the archive files
  535. that it handles,  and the command-line parameters it requires.  (If possible,
  536. send us a copy of the program so we can test it.)
  537.  
  538. There is no extra charge for this service.
  539.  
  540.  
  541.  
  542. Doing It the Hard Way
  543. ---------------------
  544.  
  545.  
  546. If you're an experienced programmer, you  can use a program such as DEBUG  to
  547. "zap" in  the name of the dearchiving program.   You can find the text string
  548. near the end of  the GO.EXE file.  The byte just prior to the string dictates
  549. the length of the string.
  550.  
  551. The string  following the  file name  contains the extension  of the  archive
  552. files (e.g. ZIP).  This should be changed if appropriate -- be sure to change
  553. the length byte if different.
  554.  
  555. The  next  string (ten  characters)  contains the  parameter  to pass  to the
  556. dearchiver.  (Some dearchivers, such as PKUNZIP, don't need a parameter)
  557.  
  558. EXAMPLE:  CHANGING FROM PKUNZIP TO LHA
  559.  
  560. Original   0B 50 4B 55 4E 5A 49 50 2E 45 58 45 00 00 03 5A .PKUNZIP.EXE...Z
  561. Hex/ASCII  49 50 00 00 00 00 00 00 00 00 00 00 00 00 0B 00 IP..............
  562.  
  563. Modified   07 4C 48 41 52 43 2E 45 58 45 00 00 00 00 03 4C .LHA.EXE.......L
  564. Hex/ASCII  5A 48 01 65 00 00 00 00 00 00 00 00 00 00 00 00 ZH.e............
  565.  
  566.  
  567.  
  568.  
  569.  
  570.  
  571.  
  572.  
  573.  
  574.  
  575.  
  576.  
  577.  
  578.                                       6
  579.  
  580.                            -----------------------
  581.                            Intermediate Techniques
  582.                            -----------------------
  583.  
  584.  
  585.  
  586. Start-Up Parameters
  587. -------------------
  588.  
  589.  
  590. If  you know that the user has a monochrome monitor but a color display card,
  591. advise him that he can improve legibility by starting up GO as follows:
  592.  
  593.                                     GO M
  594.  
  595.  
  596. For more information about start-up parameters, start GO as follows:
  597.  
  598.                                     GO ?
  599.  
  600.  
  601. An  additional  start-up parameter  (the -D  parameter)  is described  in the
  602. section of this manual entitled "GO-MENU".
  603.  
  604.  
  605.  
  606. Generating an Introductory Screen
  607. ---------------------------------
  608.  
  609.  
  610. If you want your  user to see some text  even before the main menu  shows up,
  611. place the text in a file named 'GO-STRT.DAT'.
  612.  
  613.  
  614. This is good  place to put personal notes or  special instructions that apply
  615. only to the  recipient of the diskette.  The personal note in particular is a
  616. "nice  touch" that your users may appreciate;  most people don't expect to be
  617. greeted by name when they run the installation program!
  618.  
  619.  
  620.  
  621. Letting the User Choose His Viewing Method
  622. ------------------------------------------
  623.  
  624.  
  625. When designing GO-viewable screens, bear in mind that the user  may decide to
  626. view the  file with another viewer, such as LIST,  SEE or HELPME.  Thus, even
  627. though you may be tempted to do this:
  628.  
  629.  
  630.                         End of screen 1
  631.                         <CTRL-L>Heading of Screen 2
  632.                         Text of screen 2
  633.  
  634.  
  635.  
  636.                                       7
  637.  
  638. ... you should leave at least one empty line in front of the heading:
  639.  
  640.  
  641.                         End of screen 1
  642.  
  643.                         <CTRL-L>Heading of Screen 2
  644.                         Text of screen 2
  645.  
  646.  
  647. Similarly, if  you know that  the file is likely  to be printed,  avoid using
  648. line-drawing and other special characters.
  649.  
  650.  
  651.  
  652. Information and Install Menus
  653. -----------------------------
  654.  
  655.  
  656. Information and  install menus pop up only when there  are more than one file
  657. of the appropriate type.
  658.  
  659. For example, if you  had one ZIP file, it would be  picked automatically when
  660. the user selects <Install>  from the Main Menu.  However,  if there were more
  661. than one ZIP file, the user would be presented with a menu.
  662.  
  663.  
  664.  
  665. Menu Order
  666.  
  667.  
  668. The text menu is sorted by extension according to the following order:
  669.  
  670.                                TXT   LST   S-D
  671.  
  672. If you have several  files with one extension, they appear in  the same order
  673. that is shown in the listing obtained with the DOS DIR command.
  674.  
  675. If you want to modify the  list of extensions, provide us with your  required
  676. list  when  you  register  GO  and we'll  modify  your  copy  of  the program
  677. accordingly.  There is no extra charge for this service.
  678.  
  679. If you want to  modify the list yourself, you  will find it located  near the
  680. end  of the  EXE file.   The string is  20 characters long.   For information
  681. about  such alterations, refer  to the  section entitled  "Doing It  the Hard
  682. Way".
  683.  
  684. The  install menu lists  the files  in the order  they appear in  the listing
  685. obtained with the DOS DIR command.
  686.  
  687.  
  688.  
  689.  
  690.  
  691.  
  692.  
  693.  
  694.                                       8
  695.  
  696.                              -------------------
  697.                              Advanced Techniques
  698.                              -------------------
  699.  
  700.  
  701.  
  702. Using the .GO Extension of Text Files
  703. -------------------------------------
  704.  
  705.  
  706. As mentioned earlier, the "Information" option  of the main GO menu scans for
  707. these extensions:
  708.  
  709.                                TXT   LST   S-D
  710.  
  711. GO also looks to see if you have any files with the .GO extension.  These are
  712. treated like  other text files,  except that  the first line  of the  file is
  713. displayed on the Information menu, instead of the file name.
  714.  
  715. When  the user selects the file from  the Information menu, the first line of
  716. the file (the one that appeared on the Information menu) is NOT displayed.
  717.  
  718.  
  719.  
  720. The ;INST Command
  721. -----------------
  722.  
  723.  
  724. If the last line of a .GO file is:
  725.  
  726.    ;INST
  727.  
  728. the user will be asked (after viewing the final screen of information):
  729.  
  730.    Do you want to install this now?  (Y n)
  731.  
  732. If  they press Y, the product is installed  immediately.  This saves them the
  733. trouble of going back to the main menu and then selecting "Install".
  734.  
  735. The  INST command is particularly  useful in multi-disk  installations.  This
  736. technique is described in the following section.
  737.  
  738.  
  739.  
  740.  
  741.  
  742.  
  743.  
  744.  
  745.  
  746.  
  747.  
  748.  
  749.  
  750.  
  751.  
  752.                                       9
  753.  
  754.                            -----------------------
  755.                            Multi-Disk Installation
  756.                            -----------------------
  757.  
  758.  
  759. Sometimes there  isn't enough room on a single disk  for an archive file that
  760. contains the entire product to be installed.  In such cases, you can break up
  761. the product  into multiple archives,  then use an  extended form of  the INST
  762. command to create a multi-disk installation.
  763.  
  764. The INST command supports the following parameters:
  765.  
  766.  
  767.   Parameter
  768.   Name      Note Example           Description of Parameter
  769.   --------- ---- ----------------- ------------------------
  770.   NAME       1   Name=Calc-O-Rama  Actual name of the product
  771.   SENDto     1   SendTo=CALCRAMA   Suggested directory name
  772.   STARt      2   Start=Install     Name of the first disk
  773.   THISdisk   3   ThisDisk=Install  Name of this disk
  774.   NEWDisk    4   NewDisk=Programs  Name of the next disk in the installation
  775.   NEWFile    4   NewFile=COR-2     Root name of archive file on the next disk
  776.  
  777.  
  778. Only the  first four  letters of the  parameter identifier (e.g.  NAME, NEWD,
  779. etc.) are required.
  780.  
  781. NOTE #1:  Appears only on the FIRST installation disk
  782.  
  783. NOTE #2:  Appears only on the SECOND and subsequent installation disks
  784.  
  785. NOTE #3:  Appears on all disks
  786.  
  787. NOTE #4:  Appears on all but the last disk
  788.  
  789. These parameters are explained in more detail after the example section.
  790.  
  791.  
  792.  
  793.  
  794.  
  795.  
  796.  
  797.  
  798.  
  799.  
  800.  
  801.  
  802.  
  803.  
  804.  
  805.  
  806.  
  807.  
  808.  
  809.  
  810.                                       10
  811.  
  812. Installation Example
  813. --------------------
  814.  
  815.  
  816. ASSUMPTION:  You  have a product named  "The Sapphire Bulletin Board  System"
  817. (Sapphire BBS) which you have  broken up into two ZIP files  of approximately
  818. 200K each in order to ensure that they fit on 360K disks.  Here is what would
  819. appear on each disk:
  820.  
  821.  
  822. Disk #1:
  823.  
  824.   GO.EXE
  825.  
  826.   PKUNZIP.EXE
  827.  
  828.   SAPPHIR1.ZIP
  829.  
  830.   SAPPHIR1.GO  --  This file would look something like this:
  831.  
  832.     About Sapphire
  833.     ;NEW SAPPHIRE -- THE ZERO-MAINTENANCE BBS
  834.  
  835.     SAPPHIRE is a bulletin board system that is  optimized for business and
  836.     institutional applications.   It installs in minutes  and does not need
  837.     daily maintenance.  Sapphire is reliable, simple and safe.
  838.  
  839.     ;INST/Name=Sapphire BBS/ThisDisk=Docu/NewDisk=Programs/NewFile=SAPPHIR2
  840.  
  841.  
  842. Disk #2
  843.  
  844.   GO.BAT  --  This file would look something like this:
  845.  
  846.     ECHO OFF
  847.     ECHO Please refer to Disk #1 for installation instructions.
  848.  
  849.   PKUNZIP.EXE
  850.  
  851.   SAPPHIR2.ZIP
  852.  
  853.   SAPPHIR2.GO  --  This file would look something like this:
  854.  
  855.     ;INST/ThisDisk=Programs/Start=Docu
  856.  
  857.  
  858.  
  859.  
  860.  
  861.  
  862.  
  863.  
  864.  
  865.  
  866.  
  867.  
  868.                                       11
  869.  
  870. The NAMe Parameter (Optional; first disk)
  871. ------------------
  872.  
  873.  
  874. The NAMe parameter lets you specify the actual name of your product.  This is
  875. used only in the question "Do you want to install [product name]?"  If you do
  876. not specify this parameter, the name of the archive file will be used.  
  877.  
  878.  
  879.  
  880. The SENDto Parameter (Optional; first disk)
  881. --------------------
  882.  
  883.  
  884. The SENDto parameter lets you specify the  recommended destination directory.
  885. If you do not specify this parameter,  the directory will be named after  the
  886. first archive  file.    The  user can,  of  course,  change  the  recommended
  887. installation directory in any case.
  888.  
  889. In most cases, you should NOT specify a drive  for the SENDto parameter -- GO
  890. will pick C: (or  B: if the user doesn't have a C:  drive).  However, you can
  891. specify a drive if you want to force the user to consider a particular drive.
  892.  
  893.  
  894.  
  895. The STARt Parameter  (Disk 2+)
  896. -------------------
  897.  
  898.  
  899. The STARt parameter is  used on any disks after the first  one to specify the
  900. name of  the first installation  disk.  (See THISdisk)   If the  user selects
  901. GO's "Install" option  and then selects an installation step  after the first
  902. one, it will advise him that the correct starting step is named [whatever you
  903. specify as STARt].  The user may continue with  installation if he wants, but
  904. is advised against it.
  905.  
  906.  
  907.  
  908. The THISdisk Parameter  (All disks)
  909. ----------------------
  910.  
  911.  
  912. The THISdisk parameter gives the  current disk a name.  This name  is checked
  913. when the  user inserts the disk  as the next  step in an installation.   (See
  914. NEWDisk)
  915.  
  916. The "disk  name" applies  only to  the current  installation  task (i.e.  the
  917. archive  file plus the  associated .GO file),  so you could,  in theory, have
  918. several GO files on  the disk, each giving it  a different name.  That  is to
  919. say,  the disk  itself is  not "stamped"  in any  way; the  identification is
  920. contained in the .GO file only.
  921.  
  922.  
  923.  
  924.  
  925.  
  926.                                       12
  927.  
  928. The NEWDisk Parameter  (All but last disk)
  929. ---------------------
  930.  
  931.  
  932. If there  are any disks to follow the current  one, you specify the disk name
  933. with the  NEWDisk parameter.  For example, if you  had named the current disk
  934. DISK3 by using "THIS=DISK3", it would make sense to name the next disk DISK4.
  935. You would specify this as "NEWD=DISK4".
  936.  
  937. If DISK3  was the FINAL disk,  though, you would omit  the NEWDisk parameter.
  938. This is how GO knows that the installation is complete.
  939.  
  940.  
  941.  
  942. The NEWFile Parameter  (All but last disk)
  943. ---------------------
  944.  
  945.  
  946. The NEWFile  parameter lets you specify the root name  of the archive file to
  947. be used in the next installation step.
  948.  
  949. You could,  in theory,  give  identical file  names to  all  archives on  all
  950. installation disks.  In practice, however, you will give them different names
  951. because this lets you:
  952.  
  953.   - Keep standard copies in the same hard drive directory
  954.   - Place multi-disk installation steps ON THE SAME DISK (e.g. 1.4 meg)
  955.  
  956. GO always looks  on the current disk for the NEWFile file before asking for a
  957. new disk.   Thus, you  can use the  same GO files for  both 360K and  1.4 meg
  958. installation disks.
  959.  
  960.  
  961.  
  962.  
  963.  
  964.  
  965.  
  966.  
  967.  
  968.  
  969.  
  970.  
  971.  
  972.  
  973.  
  974.  
  975.  
  976.  
  977.  
  978.  
  979.  
  980.  
  981.  
  982.  
  983.  
  984.                                       13
  985.  
  986.                              -------------------
  987.                              The GO-COPY Program
  988.                              -------------------
  989.  
  990.  
  991.  
  992. What is GO-COPY?
  993. ----------------
  994.  
  995.  
  996. GO-COPY processing lets the user copy selected files to another diskette.
  997.  
  998. If GO sees  the files GO-COPY.EXE  and GO-COPY.COP on  the diskette, it  will
  999. read the first  line of  GO-COPY.COP and display  that on  the main GO  menu.
  1000. When the user selects this item, the program GO-COPY.EXE is called.
  1001.  
  1002. GO-COPY copies  files from the diskette to another diskette.  The files to be
  1003. copied are specified in the file GO-COPY.COP (described later).
  1004.  
  1005. All  files to  be copied  are first  read into  RAM, in  order to  make rapid
  1006. duplication possible.  This  places a limit on the size of the copy task.  GO
  1007. and GO-COPY take  up around 120K, so you  need around 500K of free  memory to
  1008. copy a full 360K disk.
  1009.  
  1010. If there is not enough RAM, the user is advised to remove TSRs, or to run GO-
  1011. COPY directly (since GO is not loaded, this saves about 70K).
  1012.  
  1013.  
  1014.  
  1015. The GO-COPY.COP File
  1016. --------------------
  1017.  
  1018.  
  1019. GO-COPY.COP is a text file.  It has the following format:
  1020.  
  1021.  
  1022.                  ┌─────────────────────────────────────────┐
  1023.                  │ Text to appear on the main GO menu      │
  1024.                  │ File name                               │
  1025.                  │ File name                               │
  1026.                  │ :                                       │
  1027.                  │ :                                       │
  1028.                  │ END                                     │
  1029.                  │ Text to be displayed prior to copy task │
  1030.                  │ :                                       │
  1031.                  │ :                                       │
  1032.                  └─────────────────────────────────────────┘
  1033.  
  1034.  
  1035. Up to  50 files can be  copied by GO-COPY.  The  end of the list  of files is
  1036. indicated by the word END.  Wildcards are permitted (e.g. *.EXE).
  1037.  
  1038. The display text is  shown according to the standard display and colorization
  1039. rules described in "Basic GO Techniques".
  1040.  
  1041.  
  1042.                                       14
  1043.  
  1044.                              --------------------
  1045.                              The GO-DISKS Program
  1046.                              --------------------
  1047.  
  1048.  
  1049.  
  1050. What is GO-DISKS?
  1051. -----------------
  1052.  
  1053.  
  1054. GO-DISKS processing is just like GO-COPY processing, but  is designed for the
  1055. software developer rather  than the end user.  Instead of asking you to press
  1056. a key to continue, GO-DISKS monitors the status of the diskette drive.
  1057.  
  1058. GO-DISKS is useful when you need to create dozens of copies of the same disk.
  1059. Since the copies are performed from RAM, you can create the disks faster than
  1060. usual.
  1061.  
  1062. The  data for GO-DISKS is  kept in the text file  GO-DISKS.DSK.  You may also
  1063. pass the name of the file on the command line.  The format of GO-DISKS.DSK is
  1064. the same as for the GO-COPY.COP file.
  1065.  
  1066.  
  1067.    IMPORTANT NOTE:   GO-DISKS  requires   an  AT-class  (or
  1068.                      higher) computer.  It will not work on
  1069.                      most XT- or PC-class machines.
  1070.  
  1071.    NOTE:             If you find GO-DISKS  useful, you might also
  1072.                      consider  trying  out  the   COPYQM  program
  1073.                      created by Sydex Inc.   We ourselves use the
  1074.                      FORMATQM program, also by Sydex.
  1075.  
  1076.  
  1077.  
  1078. GO-COPY and GO-DISKS Samples
  1079. ----------------------------
  1080.  
  1081.  
  1082. The original GO  package includes sample GO-DISKS.DSK and  GO-COPY.COP files.
  1083. In order to try these out, enter
  1084.  
  1085.    GO-COPY
  1086.  
  1087. or
  1088.  
  1089.    GO-DISKS
  1090.  
  1091. at the DOS prompt.
  1092.  
  1093.  
  1094.  
  1095.  
  1096.  
  1097.  
  1098.  
  1099.  
  1100.                                       15
  1101.  
  1102.                            -----------------------
  1103.                            Using GO in Batch Files
  1104.                            -----------------------
  1105.  
  1106.  
  1107.  
  1108. NOTE: For  an example  of using  GO-MENU with  GO, order  our Maxi-Collection
  1109.       Diskette for only $3.  A  1.44 Meg diskette drive is required  for this
  1110.       special offer,  which brings you 3 megabytes of archived shareware.
  1111.  
  1112.  
  1113.  
  1114. What is GO-MENU?
  1115. ----------------
  1116.  
  1117.  
  1118. The GO-MENU  program is used in  a batch file to  present a menu of  up to 10
  1119. items.  This is ideal for organizing a diskette containing several  unrelated
  1120. programs, but can be used in any batch file application.
  1121.  
  1122. GO-MENU reads  the contents of the menu from an ordinary text file containing
  1123. ten lines, corresponding to the F1, F2 ... F10 lines on the menu.
  1124.  
  1125. The command line format for GO-MENU is:
  1126.  
  1127.    GO-MENU <menu file>
  1128.  
  1129. For example:
  1130.  
  1131.    GO-MENU MYMENU.MNU
  1132.  
  1133. For a sample menu definition, refer  to the file GO-MENU.MNU, included in the
  1134. GO  package.  It  shows also how  lines beginning  with a semi-colon  (;) are
  1135. ignored as comments.
  1136.  
  1137.  
  1138.  
  1139. Using GO -D With GO-Menu
  1140. ------------------------
  1141.  
  1142.  
  1143. The GO program has a special command line parameter designed to work with GO-
  1144. MENU.  Normally, when you call GO, it will  look in its home directory for an
  1145. archive file.  Thus,  if the user is on the C: drive  when they type A:GO, it
  1146. will look on the A: drive.
  1147.  
  1148. The -D parameter, however, tells GO  to look in the current directory.   This
  1149. lets you use a single copy  of GO to support many directories.   For example,
  1150. your batch file might look like this:
  1151.  
  1152.  
  1153.  
  1154.  
  1155.  
  1156.  
  1157.  
  1158.                                       16
  1159.  
  1160.    ECHO OFF
  1161.    REM Batch file placed in the root directory of the diskette
  1162.    A:
  1163.    :AGAIN
  1164.    CLS
  1165.    CD \
  1166.    GO-MENU MAXI.MNU
  1167.    IF ERRORLEVEL 4 CD \GAMES
  1168.    IF ERRORLEVEL 5 CD \MISC
  1169.    CLS
  1170.    \GO.EXE -D
  1171.    IF ERRORLEVEL 10 GOTO END
  1172.    GOTO AGAIN
  1173.    :END
  1174.  
  1175.  
  1176. The line:
  1177.  
  1178.    \GO.EXE -D
  1179.  
  1180. Executes  the GO program  in the root  directory.  The  -D parameter, though,
  1181. tells it to look for archives in the current directory.
  1182.  
  1183. Note also the line:
  1184.  
  1185.    IF ERRORLEVEL 10 GOTO END
  1186.  
  1187. If  GO  ends because  a  program  was just  installed,  it will  set  the DOS
  1188. Errorlevel to 10.  This lets you break out of the batch file.
  1189.  
  1190. The batch file above  is simplified for clarity.  A  more complete batch file
  1191. is presented on our Maxi-Collection diskette.
  1192.  
  1193.  
  1194.  
  1195. The GO.HDG File
  1196. ---------------
  1197.  
  1198.  
  1199. NOTE: In order  to protect our copyright,  we restrict the use  of the GO.HDG
  1200.       file to registered copies of GO.
  1201.  
  1202.  
  1203. In the sample  batch file shown previously, the user  could "navigate" to the
  1204. \GAMES  and \MISC directories.  It would be  nice if, when the GO program was
  1205. called,  it would replace the title line  (which is normally just a copyright
  1206. message) with a title like:  GAMES SECTION, or MISCELLANEOUS PROGRAMS.
  1207.  
  1208. If GO sees a  standard text file named GO.HDG  in the directory, it  will use
  1209. first line from the file as the title of the main menu screen.
  1210.  
  1211. By using a combination of GO-MENU, GO -D and GO.HDG, you can create a "guided
  1212. tour" of all your software products!
  1213.  
  1214.  
  1215.  
  1216.                                       17
  1217.  
  1218.                                 --------------
  1219.                                 Hints and Tips
  1220.                                 --------------
  1221.  
  1222.  
  1223.  
  1224. Specifying GO-COPY File Names
  1225. -----------------------------
  1226.  
  1227.  
  1228. When you specify  files in GO-COPY.COP, don't include the  drive letter.  For
  1229. example, if you list a file like this:
  1230.  
  1231.    A:\DATA\INVOICE.DAT
  1232.  
  1233. GO-COPY  will  always look  at  the A:  drive  for that  directory  and file.
  1234. However, if you specify it this way:
  1235.  
  1236.    \DATA\INVOICE.DAT
  1237.  
  1238. GO-COPY will look on whatever  drive GO-COPY itself is  on.  This is  usually
  1239. the A: drive, but this will let the user run GO-COPY from any drive.
  1240.  
  1241.  
  1242.  
  1243. Renaming Copy Files
  1244. -------------------
  1245.  
  1246.  
  1247. The files  listed in GO-COPY.COP or GO-DISKS.DSK can be copied to a file with
  1248. a  different name.  Simply specify the new  name after the name of the source
  1249. file.  For example:
  1250.  
  1251.    \MYPROG\TEST.EXE PROGRAM.EXE
  1252.  
  1253. This feature  can not be  used with  wildcards.  For  example, the  following
  1254. lines would NOT be valid:
  1255.  
  1256.    \BAD\*.EXE NAUGHTY.EXE
  1257.  
  1258.    \BAD\*.DOG *.CAT
  1259.  
  1260.  
  1261.  
  1262.  
  1263.  
  1264.  
  1265.  
  1266.  
  1267.  
  1268.  
  1269.  
  1270.  
  1271.  
  1272.  
  1273.  
  1274.                                       18
  1275.  
  1276.                        -------------------------------
  1277.                        Other Programs Included with GO
  1278.                        -------------------------------
  1279.  
  1280.  
  1281.  
  1282. The following  programs are also included  with GO.   We've found them  to be
  1283. quite  useful in  packaging  software.    Please  see  the  section  entitled
  1284. "Versions and Registration"  for information about the  distribution of these
  1285. programs.
  1286.  
  1287.  
  1288.  
  1289. SEE
  1290. ---
  1291.  
  1292.  
  1293. The  SEE  program displays  (and optionally  prints) a  text  file.   We have
  1294. included it as a document viewer for this manual.  You may find it useful for
  1295. your own applications.
  1296.  
  1297. The format for SEE is:
  1298.  
  1299.    SEE <file name>
  1300.  
  1301. For example:
  1302.  
  1303.    SEE MYFILE.TXT
  1304.  
  1305. For complete instructions, enter this command:
  1306.  
  1307.    SEE /?
  1308.  
  1309. SEE is a freeware program.  A more sophisticated shareware file viewer is the
  1310. LIST program created by Vernon Buerg, which we recommend highly.  Contact Mr.
  1311. Buerg for licensing details.
  1312.  
  1313.  
  1314.  
  1315. GO_SMALL
  1316. --------
  1317.  
  1318.  
  1319. This is a compressed  copy of the GO.EXE program.  We  recommend that you use
  1320. an EXE file compressor before you put your copy of GO onto the diskette; this
  1321. leaves more  room  for  software.    If you  don't  have  access  to  an  EXE
  1322. compressor, you can copy GO_SMALL.EXE to your diskette as GO.EXE.
  1323.  
  1324. GO_SMALL  is a  copy of  GO.EXE that  was compressed  with the  DIET program.
  1325. Since it is  compressed, you can  not modify it  as described in the  section
  1326. "Doing it  the Hard Way".   If you want  to apply modifications, you  must do
  1327. them to an uncompressed copy of GO.EXE.
  1328.  
  1329. Another popular EXE compressor is PKLITE from PKWare.
  1330.  
  1331.  
  1332.                                       19
  1333.  
  1334.  
  1335. READING
  1336. -------
  1337.  
  1338.  
  1339. The READING.EXE program displays  the message "Reading Disk...".   This gives
  1340. the  user something to  look at while  jumping from  place to place  in batch
  1341. files, which are notoriously slow when run from diskettes.
  1342.  
  1343.  
  1344.  
  1345. SETERR
  1346. ------
  1347.  
  1348.  
  1349. SETERR sets the DOS Errorlevel to the specified number.   The format for this
  1350. command is:
  1351.  
  1352.    SETERR <number>
  1353.  
  1354. For example:
  1355.  
  1356.    SETERR 25
  1357.  
  1358. SETERR is used in batch files.
  1359.  
  1360.  
  1361.  
  1362. WAITBLK
  1363. -------
  1364.  
  1365.  
  1366. The  WAITBLK  program  is  a batch-file  utility  which  lets  you  create an
  1367. alternative to GO-DISKS  processing (described earlier).   WAITBLK will  wait
  1368. for a blank diskette to be inserted into the specified drive.
  1369.  
  1370. For details, enter the DOS command:  WAITBLK ?
  1371.  
  1372. WAITBLK is not compatible with XT and PC machines.
  1373.  
  1374.  
  1375.  
  1376.  
  1377.  
  1378.  
  1379.  
  1380.  
  1381.  
  1382.  
  1383.  
  1384.  
  1385.  
  1386.  
  1387.  
  1388.  
  1389.  
  1390.                                       20
  1391.  
  1392.                           -------------------------
  1393.                           Versions and Registration
  1394.                           -------------------------
  1395.  
  1396.  
  1397.  
  1398. Changes Between Versions
  1399. ------------------------
  1400.  
  1401.  
  1402. If  you're curious about what has changed between  versions, or if you have a
  1403. problem and  think it might be caused by an upgrade incompatibility, refer to
  1404. the version history file by entering the following command at the DOS prompt:
  1405.  
  1406.    SEE CHANGE.LOG
  1407.  
  1408.  
  1409.  
  1410. Free Usage of GO Programs
  1411. -------------------------
  1412.  
  1413.  
  1414. You are  entitled to  use the GO  program to distribute  your software.   You
  1415. don't have to pay  a penny for the privilege!   For full details, run  the GO
  1416. program  that  comes  with  this  package  and  review  the  article  in  the
  1417. Information section entitled "How to Register Your Copy of GO".
  1418.  
  1419. Why do we allow people to use our program without paying for it?  Because all
  1420. unregistered copies of GO contain our advertising screen (i.e. the "About GO"
  1421. selection on  the main menu).  Thus, by passing around unregistered copies of
  1422. GO, you are helping us advertise.  Everybody wins!
  1423.  
  1424. As for the programs GO-DISKS,  GO-COPY, GO-MENU, you are welcome to  use them
  1425. without registering, but only in conjunction with our GO program.  That is to
  1426. say, you  may not  distribute a  diskette  containing one  of these  programs
  1427. unless:
  1428.  
  1429.    (A) You are a registered owner of GO, or ...
  1430.    (B) An unregistered GO program also appears on diskette.
  1431.  
  1432. The programs  SEE, READING, SETERR and  WAITBLK may be sold,  traded or given
  1433. away, but may not be modified in any way.
  1434.  
  1435.  
  1436.  
  1437. Ordering Upgrades to GO
  1438. -----------------------
  1439.  
  1440.  
  1441. If  you have  already registered a  copy of GO  and would like  to register a
  1442. newer version, all further GO  orders are available from Pinnacle at  25% off
  1443. the prices indicated on the order form.  
  1444.  
  1445.  
  1446.  
  1447.  
  1448.                                       21
  1449.  
  1450. Standard Discount
  1451.  
  1452.  
  1453. If you have registered more than $40 worth of software from Pinnacle, you are
  1454. entitled to $10  off any  future single-product registration  priced at  over
  1455. $40.
  1456.  
  1457.  
  1458.  
  1459. Thank-You!
  1460. ----------
  1461.  
  1462.  
  1463. If  you're trying  GO for  the first time,  we'd like  to thank  you for your
  1464. interest in our product, and for taking the time to evaluate it.
  1465.  
  1466. If you're  a registered owner,  or you're planning  on ordering  a registered
  1467. copy, we thank you  for supporting the  shareware concept; it's your  support
  1468. that  makes  it  possible   for  shareware  authors  to   continue  producing
  1469. affordable, quality software!
  1470.  
  1471.  
  1472.  
  1473.  
  1474.  
  1475.  
  1476.  
  1477.  
  1478.  
  1479.  
  1480.  
  1481.  
  1482.  
  1483.  
  1484.  
  1485.  
  1486.  
  1487.  
  1488.  
  1489.  
  1490.  
  1491.  
  1492.  
  1493.  
  1494.  
  1495.  
  1496.  
  1497.  
  1498.  
  1499.  
  1500.  
  1501.  
  1502.  
  1503.  
  1504.  
  1505.  
  1506.                                       22
  1507.  
  1508.                                     -----
  1509.                                     Index
  1510.                                     -----
  1511.  
  1512.                Can't find it here?  Try the Table of Contents.
  1513.  
  1514.  
  1515. .GO  9
  1516. ;INST  5, 9
  1517. ;NEW  4
  1518. 1.4 Meg  13
  1519. 360K  13
  1520. A:  2, 3, 16, 18
  1521. About "GO"  3
  1522. Advertising  21
  1523. ANSI  4
  1524. ARC  ii, 4
  1525. ARCE  ii, 2, 4
  1526. Archive  2, 4, 16
  1527. Arrow keys  3
  1528. ASCII  4
  1529.    12  4
  1530. AT  15
  1531. Author  1
  1532. B:  3
  1533. Batch  1, 16, 17, 20
  1534. Blank  1
  1535. Buerg  ii, 19
  1536. BW80  4
  1537. C:  16
  1538. CHANGE.LOG  21
  1539. Color  4, 7
  1540. Command-line  6
  1541. Comment  16
  1542. Compress  1, 19
  1543. Compressor  19
  1544. COP  14
  1545. Copy  1, 14
  1546. COPYQM  ii, 15
  1547. Copyright  1, 3, 17
  1548. Ctrl-L  4
  1549. Ctrl-P  4
  1550. Curious  21
  1551. Dearchive  3
  1552. Dearchiving  2
  1553. Dearchiving Method  6
  1554. Dearchiving program  5
  1555. DEBUG  6
  1556. DIET  ii, 19
  1557. DIR  8
  1558. Directory  2-4, 16
  1559. Discount  22
  1560. Diskette  1, 2, 15
  1561. Distribution  2
  1562. DOC  5
  1563.  
  1564.                                       23
  1565.  
  1566. Documentation  3
  1567. DOS
  1568.    Errorlevel  1, 17, 20
  1569.    Shell  2, 5
  1570. Drive  2, 15, 16, 18
  1571. Easier  2
  1572. END  14
  1573. Enter  3
  1574. Errorlevel  1, 17, 20
  1575. EXE  8, 19
  1576. File  2
  1577. File name  9
  1578. Form Feed  4
  1579. FORMATQM  ii, 15
  1580. Free  21
  1581. Freeware  ii, 19
  1582. Function keys  3
  1583. GO  1, 2, 16
  1584. GO.EXE  6, 19
  1585. GO.HDG  17
  1586. GO-COPY  1, 14, 15, 21
  1587. GO-COPY.COP  14, 18
  1588. GO-DISKS  1, 15, 20, 21
  1589. GO-DISKS.DSK  15, 18
  1590. GO-FORM.DAT  3
  1591. GO-MENU  1, 16
  1592. GO-MENU.MNU  16
  1593. GO-STRT.DAT  7
  1594. GO_SMALL  1, 19, 21
  1595. Guided tour  17
  1596. Help  4
  1597. HELPME  3, 7
  1598. Incompatibility,  21
  1599. Information  3, 8, 9
  1600. INST  5, 9
  1601. Install  2-4, 8, 9
  1602. LHARC  ii, 2
  1603. Line-drawing  8
  1604. LIST  ii, 7, 19
  1605. LST  3, 8, 9
  1606. LZH  1, 2
  1607. Main menu  3, 4, 7, 9, 14, 17, 21
  1608. Matsumoto  ii
  1609. Maxi-Collection  16, 17
  1610. Menu  1, 3, 4, 8, 16
  1611. MODE  4
  1612. Modifications,  19
  1613. Modify  8
  1614. Monitor  4, 7
  1615. Monochrome  4, 7
  1616. Multi-disk  10
  1617. NAMe  12
  1618. NEW  4
  1619. NEWDisk  13
  1620. NEWFile  13
  1621.  
  1622.                                       24
  1623.  
  1624. Novice  2
  1625. Obsolete
  1626.    Dearchiver  5
  1627. Packaging  19
  1628. PAK  2
  1629. Parameter  6, 7, 16
  1630. PATH  5
  1631. PC  15, 20
  1632. Personalized  3
  1633. PKLITE  ii, 19
  1634. PKUNZIP  ii, 2, 4
  1635. PKWare  ii
  1636. PKWare.  19
  1637. PKZIP  2
  1638. Print  1, 8, 19
  1639. Print reply form  3
  1640. Problem  21
  1641. QEdit  4
  1642. Quit  3
  1643. READ.ME  5
  1644. READING  1, 20, 21
  1645. Register  6, 21
  1646. Registered  21
  1647. Renaming  18
  1648. Reply  1, 3
  1649. Root  17
  1650. S-D  3, 8, 9
  1651. Sample  15, 16
  1652. SEA  ii
  1653. SEE  1, 3, 7, 19, 21
  1654. Semi-colon  16
  1655. SENDto  12
  1656. SETERR  1, 20, 21
  1657. Shareware  ii, 2, 16, 19
  1658. Shell  2, 5
  1659. Special characters  8
  1660. STARt  12
  1661. Sydex  ii, 15
  1662. Text editor  3
  1663. Text file  3, 9, 14, 17, 19
  1664. THISdisk  12
  1665. Title  17
  1666. Trademark  ii
  1667. TSRs  14
  1668. TXT  3, 8, 9
  1669. Unregistered  3, 21
  1670. Upgrade  21
  1671. Upgrades  21
  1672. Versions  21
  1673. View  1, 19
  1674. WAITBLK  1, 20, 21
  1675. Wildcards  14, 18
  1676. WordStar  4
  1677. XT  15, 20
  1678. Yoshi  ii
  1679.  
  1680.                                       25
  1681.  
  1682. Zap  6
  1683. ZIP  1, 2, 4
  1684. ZOO  2
  1685.  
  1686.  
  1687.  
  1688.  
  1689.  
  1690.  
  1691.  
  1692.  
  1693.  
  1694.  
  1695.  
  1696.  
  1697.  
  1698.  
  1699.  
  1700.  
  1701.  
  1702.  
  1703.  
  1704.  
  1705.  
  1706.  
  1707.  
  1708.  
  1709.  
  1710.  
  1711.  
  1712.  
  1713.  
  1714.  
  1715.  
  1716.  
  1717.  
  1718.  
  1719.  
  1720.  
  1721.  
  1722.  
  1723.  
  1724.  
  1725.  
  1726.  
  1727.  
  1728.  
  1729.  
  1730.  
  1731.  
  1732.  
  1733.  
  1734.  
  1735.  
  1736.  
  1737.  
  1738.                                       26
  1739.